如何在CentOS 7上搭建LAMP环境(使用YUM或编译)

[root@localhost ~]# cat /etc/redhat-release
CentOS Linux release 7.5.1804 (Core)

[root@wencheng ~]# systemctl status firewalld
● firewalld.service - firewalld - dynamic firewall daemon
   Loaded: loaded (/usr/lib/systemd/system/firewalld.service; enabled; vendor preset: enabled)
   Active: inactive (dead) since Tue 2021-04-27 11:53:37 CST; 2s ago
     Docs: man:firewalld(1)
  Process: 5265 ExecStart=/usr/sbin/firewalld --nofork --nopid $FIREWALLD_ARGS (code=exited, status=0/SUCCESS)
 Main PID: 5265 (code=exited, status=0/SUCCESS)

注：参数是inactive，则防火墙为关闭状态；参数是active，则防火墙为开启状态。

[root@wencheng ~]# systemctl disable firewalld　　　　//永久关闭防火墙
Removed symlink /etc/systemd/system/multi-user.target.wants/firewalld.service.
Removed symlink /etc/systemd/system/dbus-org.fedoraproject.FirewallD1.service.
[root@wencheng ~]# systemctl is-enabled firewalld　　　　//确认永久关闭成功　
disabled

[root@wencheng ~]# sed -i.bak '7s#enforcing#disabled#' /etc/selinux/config　　　　//永久关闭SELinux
[root@wencheng ~]# cat /etc/selinux/config
# This file controls the state of SELinux on the system.
# SELINUX= can take one of these three values:
# enforcing - SELinux security policy is enforced.
# permissive - SELinux prints warnings instead of enforcing.
# disabled - No SELinux policy is loaded.
SELINUX=disabled
# SELINUXTYPE= can take one of three two values:
# targeted - Targeted processes are protected,
# minimum - Modification of targeted policy. Only selected processes are protected.
# mls - Multi Level Security protection.
SELINUXTYPE=targeted

[root@wencheng ~]# setenforce 0　　　　//临时关闭SELinux
[root@wencheng ~]# getenforce
Permissive

[root@wencheng ~]# yum --exclude=kernel* --exclude=centos-release* update -y

[root@wencheng ~]# yum -y install httpd httpd-manual mod_ssl mod_perl mod_auth_mysql　　　　//安装Apache服务及扩展包

[root@wencheng ~]# httpd -v　　　　//查看版本信息
Server version: Apache/2.4.6 (CentOS)
Server built:   Nov 16 2020 16:18:20

[root@wencheng ~]# systemctl start httpd　　　　//启动Apache服务器

[root@wencheng ~]# systemctl enable httpd　　　　//设置Apache开机自启动
Created symlink from /etc/systemd/system/multi-user.target.wants/httpd.service to /usr/lib/systemd/system/httpd.service.

[root@wencheng ~]# rpm -Uvh  http://dev.mysql.com/get/mysql57-community-release-el7-9.noarch.rpm　　　　//更新YUM源

[root@wencheng ~]# yum -y install mysql-community-server　　　　//安装MySQL

[root@wencheng ~]# mysql -V　　　　//查看MySQL版本
mysql  Ver 14.14 Distrib 5.7.34, for Linux (x86_64) using  EditLine wrapper

[root@wencheng ~]# systemctl start mysqld　　　　//启动MySQL

[root@wencheng ~]# systemctl enable mysqld　　　　//设置开机自启动
[root@wencheng ~]# systemctl daemon-reload

[root@wencheng ~]# grep password /var/log/mysqld.log　　　　//查看MySQL初始密码
2021-04-27T06:24:20.509347Z 1 [Note] A temporary password is generated for root@localhost: 8kfepaL?l,#x

[root@wencheng ~]# mysql_secure_installation　　　　//配置MySQL的安全性

Securing the MySQL server deployment.

Enter password for user root:　　　　　　//输入上一步获取的root用户初始密码(8kfepaL?l,#x)

The existing password for the user account root has expired. Please set a new password.

New password:　　　　//输入新密码，长度为8至30个字符，必须同时包含大小写英文字母、数字和特殊符号Re-enter new password:

Re-enter new password:　　　　//再次输入新密码
The 'validate_password' plugin is installed on the server.
The subsequent steps will run with the existing configuration
of the plugin.
Using existing password for root.

Estimated strength of the password: 100
Change the password for root ? ((Press y|Y for Yes, any other key for No) : y

New password:　　　　//输入新密码，长度为8至30个字符，必须同时包含大小写英文字母、数字和特殊符号

Re-enter new password:　　　　//再次输入新密码

Estimated strength of the password: 100
Do you wish to continue with the password provided?(Press y|Y for Yes, any other key for No) : y　　　　//是否继续使用所提供的密码，输入Y
By default, a MySQL installation has an anonymous user,
allowing anyone to log into MySQL without having to have
a user account created for them. This is intended only for
testing, and to make the installation go a bit smoother.
You should remove them before moving into a production
environment.

Remove anonymous users? (Press y|Y for Yes, any other key for No) : y　　　　//是否删除匿名用户，输入Y
Success.


Normally, root should only be allowed to connect from
'localhost'. This ensures that someone cannot guess at
the root password from the network.

Disallow root login remotely? (Press y|Y for Yes, any other key for No) : y　　　　//禁止root远程登录，输入Y
Success.

By default, MySQL comes with a database named 'test' that
anyone can access. This is also intended only for testing,
and should be removed before moving into a production
environment.


Remove test database and access to it? (Press y|Y for Yes, any other key for No) : y　　　　//是否删除test库和对它的访问权限，输入Y
 - Dropping test database...
Success.

 - Removing privileges on test database...
Success.

Reloading the privilege tables will ensure that all changes
made so far will take effect immediately.

Reload privilege tables now? (Press y|Y for Yes, any other key for No) : y　　　　//是否重新加载授权表，输入Y
Success.

All done

[root@wencheng ~]# yum install -y https://repo.ius.io/ius-release-el7.rpm https://dl.fedoraproject.org/pub/epel/epel-release-latest-7.noarch.rpm　　　　//添加epel源

[root@wencheng ~]# rpm -Uvh https://mirror.webtatic.com/yum/el7/webtatic-release.rpm　　　　//更新YUM源

[root@wencheng ~]# yum -y install php70w-devel php70w.x86_64 php70w-cli.x86_64 php70w-common.x86_64 php70w-gd.x86_64 php70w-ldap.x86_64 php70w-mbstring.x86_64 \
php70w-mcrypt.x86_64 php70w-pdo.x86_64   php70w-mysqlnd  php70w-fpm php70w-opcache php70w-pecl-redis php70w-pecl-mongodb　　　　//安装PHP

[root@wencheng ~]# php -v　　　　//查看PHP版本
PHP 7.0.33 (cli) (built: Dec  6 2018 22:30:44) ( NTS )
Copyright (c) 1997-2017 The PHP Group
Zend Engine v3.0.0, Copyright (c) 1998-2017 Zend Technologies
    with Zend OPcache v7.0.33, Copyright (c) 1999-2017, by Zend Technologies

[root@wencheng ~]# echo "<?php phpinfo(); ?>" > /var/www/html/phpinfo.php　　　　//在Apache网站根目录创建测试文件

[root@wencheng ~]# systemctl restart httpd　　　　//重启Apache服务器

[root@wencheng ~]# rpm -qa | grep httpd　　　　//查看是否已经安装了相关rpm包
[root@wencheng ~]# rpm -qa | grep mysql
[root@wencheng ~]# rpm -qa | grep php

[root@wencheng ~]# ls 
apr-1.6.2.tar.bz2 apr-util-1.6.0.tar.bz2 httpd-2.4.6.tar.bz2 mysql-5.7.31.tar.gz php-7.0.33.tar.gz

[root@wencheng ~]# yum -y install gcc gcc-c++ make pcre pcre-devel expat-devel perl bzip2　　　//安装依赖包
[root@wencheng ~]# mkdir -pv /usr/local/app

[root@wencheng ~]# tar xf apr-1.6.2.tar.bz2 -C /usr/local/src/
[root@wencheng ~]# tar xf apr-util-1.6.0.tar.bz2 -C /usr/local/src/
[root@wencheng ~]# tar xf httpd-2.4.6.tar.bz2 -C /usr/local/src/
[root@wencheng ~]# ls /usr/local/src/
apr-1.6.2  apr-util-1.6.0  httpd-2.4.6

[root@wencheng ~]# cd /usr/local/src/apr-1.6.2
[root@wencheng apr-1.6.2]# ./configure --prefix=/usr/local/app/apr
[root@wencheng apr-1.6.2]# make -j 4 && make install　　　　//make -j 4 表示开4核同时进行编译： cat /proc/cpuinfo| grep "processor"| wc -l 

[root@wencheng ~]# cd /usr/local/src/apr-util-1.6.0
[root@wencheng apr-util-1.6.0]# ./configure --prefix=/usr/local/app/apr-util --with-apr=/usr/local/app/apr
[root@wencheng apr-util-1.6.0]# make -j 4 && make install

[root@wencheng ~]# cd /usr/local/src/httpd-2.4.6
[root@wencheng httpd-2.4.6]# ./configure --prefix=/usr/local/app/apache --sysconfdir=/etc/apache \
--with-apr=/usr/local/app/apr --with-apr-util=/usr/local/app/apr-util --with-z --with-pcre \
--with-mpm=event --enable-so --enable-rewrite --enable-mpms-shared=all
[root@wencheng httpd-2.4.6]# make -j 4 && make install

说明：
--prefix=/usr/local/app/apache　　指定httpd服务程序的安装路径
--sysconfdir=/etc/apache　　指定httpd服务程序配置文件路径
--with-apr=/usr/local/app/apr　　　　指明apr路径
--with-apr-util=/usr/local/app/apr-util 　　　指明apr-util路径
--with-z 　　　　支持数据压缩
--with-pcre 　　　　兼容正则表达式
--with-mpm=event 　　指定流模型为event
--enable-so　　　　启用动态加载模块支持，使httpd具备进一步扩展功能的能力
--enable-rewrite　　　　启用网页地址重写功能，用于网站优化、防盗链及目录迁移维护
--enable-mpms-shared=all　　　　全部的工作模型

启动apache服务方法一：
[root@wencheng ~]# vim /etc/systemd/system/httpd.service　　　　//将以下代码写在httpd.service文件中并存放在etc/systemd/system/目录下
Description=Start httpd
[Service]
Type=simple
EnvironmentFile=/etc/apache/httpd.conf
ExecStart=/usr/local/app/apache/bin/httpd -k start -DFOREGROUND
ExecReload=/usr/local/app/apache/bin/httpd -k graceful
ExecStop=/bin/kill -WINCH ${MAINPID}
[Install]
WantedBy=multi-user.target
[root@wencheng ~]# systemctl daemon-reload　　　　//重新加载
[root@wencheng ~]# systemctl start httpd　　　　//启动apache服务
启动apache服务方法二：
[root@wencheng ~]# echo "MANPATH /usr/local/app/apache/man" >> /etc/man_db.conf　　　　//设置man路径
[root@wencheng ~]# echo 'PATH=/usr/local/app/apache/bin:$PATH' > /etc/profile.d/apache.sh　　　　//设置PATH环境变量
[root@wencheng ~]# source /etc/profile.d/apache.sh
[root@wencheng ~]# ln -s /usr/include /usr/local/app/apache/include　　　　//输出头文件
[root@wencheng apache]# echo 'PidFile "/var/run/httpd.pid"' >> /etc/apache/httpd.conf

[root@wencheng ~]# apachectl start　　　　//启动apache服务
AH00558: httpd: Could not reliably determine the server's fully qualified domain name, using fe80::20c:29ff:feb2:9730. Set the 'ServerName' directive globally to suppress this message
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
[root@wencheng ~]# ps -ef | grep httpd　　　　//查看进程
root      46451      1  0 17:43 ?        00:00:00 /usr/local/app/apache/bin/httpd -k start
daemon    46452  46451  0 17:43 ?        00:00:00 /usr/local/app/apache/bin/httpd -k start
daemon    46453  46451  0 17:43 ?        00:00:00 /usr/local/app/apache/bin/httpd -k start
daemon    46454  46451  0 17:43 ?        00:00:00 /usr/local/app/apache/bin/httpd -k start
root      46537   1560  0 17:43 pts/0    00:00:00 grep --color=auto httpd

[root@wencheng ~]# ss -nutl　　　　//查看80端口
Netid  State      Recv-Q Send-Q                               Local Address:Port                                              Peer Address:Port
udp    UNCONN     0      0                                        127.0.0.1:323                                                          *:*
udp    UNCONN     0      0                                              ::1:323                                                         :::*
tcp    LISTEN     0      128                                              *:22                                                           *:*
tcp    LISTEN     0      100                                      127.0.0.1:25                                                           *:*
tcp    LISTEN     0      128                                             :::80                                                          :::*
tcp    LISTEN     0      128                                             :::8081                                                        :::*
tcp    LISTEN     0      128                                             :::22                                                          :::*
tcp    LISTEN     0      100                                            ::1:25                                                          :::*

[root@wencheng ~]# cat /usr/local/app/apache/htdocs/index.html
<html><body><h1>It works!</h1></body></html>
[root@wencheng ~]# curl 127.0.0.1　　　　//测试curl返回
<html><body><h1>It works!</h1></body></html>

[root@wencheng ~]# useradd -r -s /sbin/nologin apache
[root@wencheng ~]# chown -R apache:apache /usr/local/app/apache
[root@wencheng ~]# ls -ld /usr/local/app/apache/
drwxr-xr-x. 13 apache apache 152 Apr 28 14:49 /usr/local/app/apache/

[root@wencheng ~]# vim /etc/apache/httpd.conf
#服务的路径
ServerRoot "/usr/local/app/apache"

#监听端口
Listen 80
Listen 8081

#管理员的邮件（若服务出现了问题，会给管理员发邮件,前提是服务器能发出邮件）
ServerAdmin you@example.com

#作为httpd运行的用户/组
User apache
Group apache

#域名信息
ServerName 127.0.0.1:80
ServerName 127.0.0.1:8081

#apache发布的目录
DocumentRoot "/usr/local/app/apache/htdocs"

<IfModule dir_module>
   #默认访问文件
    DirectoryIndex index.html
</IfModule>

#错误日志
ErrorLog "logs/error_log"
#警告级别：info debug error warn
LogLevel warn

#启用 rewrite 引擎
RewriteEngine on
RewriteCond %{HTTP_HOST} ^www.example.com:8888 [NC]
RewriteRule ^/(.*)$ http://www.baidu.com/$1 [L]
LoadModule rewrite_module modules/mod_rewrite.so

#引用多域名的配置
#NameVirtualHost *:8081
Include conf/extra/httpd-vhosts.conf

#导入mpm详细配置
Include conf/extra/httpd-mpm.conf

[root@wencheng ~]# vim /etc/apache/extra/httpd-vhosts.conf 
#虚拟主机1监听端口号80
#NameVirtualHost *:80
<VirtualHost *:80>
　　ServerAdmin webmaster@dummy-host.example.com
　　#虚拟主机2的发布目录   
　　DocumentRoot "/usr/local/app/apache/htdocs/host1"
    ServerName dummy-host.example.com
    ServerAlias www.dummy-host.example.com
    ErrorLog "logs/dummy-host1.example.com-error_log"
    CustomLog "logs/dummy-host1.example.com-access_log" common
</VirtualHost>

#虚拟主机1监听端口号8081
#NameVirtualHost *:8081
<VirtualHost *:8081> 
　　ServerAdmin webmaster@dummy-host2.example.com
　　#虚拟主机2的发布目录
    DocumentRoot "/usr/local/app/apache/htdocs/host2"
    ServerName dummy-host2.example.com
    ErrorLog "logs/dummy-host2.example.com-error_log"
    CustomLog "logs/dummy-host2.example.com-access_log" common
</VirtualHost>

mpm的参数设置可能不对，可自行百度进行相应设置
[root@wencheng apache]# vim extra/httpd-mpm.conf
#prefork MPM
<IfModule mpm_prefork_module>
    #启动的工作进程数  企业中一般配置8/10/16 不会太(默认初始化生成数量)
    StartServers            8
    #最多同时xx进程，一般与MaxClients相对应或者大于MaxClients
    MinSpareServers         10000
    #最小空闲进程
    MaxSpareServers         25
    #最大空闲进程
    MaxRequestWorkers       75
    #最大支持多少个客户端访问(最大工作进程，每秒处理数量)
    MaxClients              1000
    #每个进程处理的最大请求数（当达到设置的数量后该线程会被kil掉,0代表永生）
    MaxConnectionsPerChild  10000
</IfModule>
#worker
<IfModule mpm_worker_module>
    StartServers             8
#    MaxClients               4000
    MinSpareThreads          25
    MaxSpareThreads          75
    #每个进程有多少线程数
    ThreadsPerChild          25
    MaxRequestWorkers      400
    MaxConnectionsPerChild   10000
#</IfModule>

[root@wencheng ~]# wget http://sourceforge.net/projects/boost/files/boost/1.59.0/boost_1_59_0.tar.bz2
[root@wencheng ~]# tar xf boost_1_59_0.tar.gz -C /usr/local/app/mysql/boost
[root@wencheng ~]# tar xf mysql-5.7.31.tar.gz -C /usr/local/src/
[root@wencheng ~]# cd /usr/local/src/mysql-5.7.31

[root@wencheng mysql-5.7.31]# yum install -y cmake openssl-devel bison*

[root@wencheng mysql-5.7.31]# cmake . \
> -DCMAKE_INSTALL_PREFIX=/usr/local/app/mysql \
> -DMYSQL_DATADIR=/usr/local/app/mysql/data \
> -DSYSCONFDIR=/etc \
> -DDEFAULT_CHARSET=utf8mb4 \
> -DENABLED_LOCAL_INFILE=1 \
> -DWITH_BOOST=/usr/local/app/mysql/boost \
> -DEXTRA_CHARSETS=all
说明：
-DCMAKE_INSTALL_PREFIX：mysql安装目录
-DMYSQL_DATADIR：数据存放目录
-DSYSCONFDIR：my.cnf配置文件目录
-DEFAULT_CHARSET：数据库默认字符编码
-DENABLED_LOCAL_INFILE：允许从本文件导入数据
-DWITH_BOOST=/usr/local/app/mysql/boost: boost源码路径
-DEXTRA_CHARSETS：安装所有字符集

# 若每次编译出错了，需根据下面操作，然后再重新编译安装。
[root@wencheng mysql-5.7.31]# find / -iname CMakeCache.txt
[root@wencheng mysql-5.7.31]# make clean
[root@wencheng mysql-5.7.31]# rm -f CMakeCache.txt

[root@wencheng mysql-5.7.31]# make -j 4 && make install

[root@wencheng mysql-5.7.31]# free -m
              total        used        free      shared  buff/cache   available
Mem:           1982          63        1769           0         149        1753
Swap:          2047          51        1996

[root@wencheng mysql-5.7.31]# dd if=/dev/zero of=/swapfile bs=1k count=4096000
4096000+0 records in
4096000+0 records out
4194304000 bytes (4.2 GB) copied, 26.196 s, 160 MB/s
[root@wencheng mysql-5.7.31]# mkswap /swapfile
Setting up swapspace version 1, size = 4095996 KiB
no label, UUID=ae18f018-86b3-4ef8-ada0-f54f64efc980

[root@wencheng mysql-5.7.31]# swapon /swapfile
[root@wencheng mysql-5.7.31]# free -m
              total        used        free      shared  buff/cache   available
Mem:           1982          65          65           1        1851        1716
Swap:          6047          50        5997

# 删除/swapfile操作
[root@wencheng mysql-5.7.31]# swapoff /swapfile
[root@wencheng mysql-5.7.31]# rm -rf /swapfile

[root@wencheng app]# useradd -r -s /sbin/nologin mysql
[root@wencheng app]# chown -R mysql:mysql /usr/local/app/mysql
[root@wencheng mysql]# ls -ld /usr/local/app/mysql
drwxr-xr-x 11 mysql mysql 179 Apr 30 12:23 /usr/local/app/mysql
[root@wencheng mysql]# mkdir -p /usr/local/app/mysql/data

[root@wencheng mysql]# vim /etc/my.cnf
[client]
port = 3306
default-character-set = utf8
socket = /usr/local/app/mysql/mysql.sock

[mysql]
port = 3306
default-character-set = utf8
socket = /usr/local/app/mysql/mysql.sock

[mysqld]
user = mysql
basedir = /usr/local/app/mysql
datadir = /usr/local/app/mysql/data
port = 3306
pid-file = /usr/local/app/mysql/mysql.pid
socket = /usr/local/app/mysql/mysql.sock
server-id = 1
character_set_server=utf8

[root@wencheng mysql]# ./bin/mysqld --initialize-insecure --user=mysql --basedir=/usr/local/app/mysql --datadir=/usr/local/app/mysql/data

[root@wencheng mysql]# echo 'PATH=/usr/local/app/mysql/bin:/usr/local/app/mysql/lib:$PATH' >> /etc/profile.d/mysqld.sh
[root@wencheng mysql]# source /etc/profile.d/mysqld.sh

# 生成启动脚本
[root@wencheng mysql]# cp support-files/mysql.server /etc/init.d/mysqld

# 启动服务和设置开机自启
[root@wencheng mysql]# /etc/init.d/mysqld start
Starting MySQL..Logging to '/usr/local/app/mysql/data/wencheng.err'.
................................................................................................... SUCCESS!

[root@wencheng mysql]# service mysqld status
 SUCCESS! MySQL running (80286)

[root@wencheng mysql]# chkconfig --add mysqld
[root@wencheng mysql]# chkconfig mysqld on

[root@wencheng mysql]# ss -tnl | grep 3306　　　　//查看mysql 3306端口是否存在
LISTEN     0      80          :::3306                    :::*

[root@wencheng mysql]# mysql -uroot -p
Enter password:　　　　　　　　//空密码，回车即可
Welcome to the MySQL monitor.  Commands end with ; or \g.
Your MySQL connection id is 2
Server version: 5.7.31 Source distribution

Copyright (c) 2000, 2020, Oracle and/or its affiliates. All rights reserved.

Oracle is a registered trademark of Oracle Corporation and/or its
affiliates. Other names may be trademarks of their respective
owners.

Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.

mysql>

# 查看Mysql版本
mysql> select version();　　　　
+-----------+
| version() |
+-----------+
| 5.7.31    |
+-----------+
1 row in set (0.00 sec)

[root@wencheng ~]# tar -xf php-7.0.33.tar.gz -C /usr/local/src
[root@wencheng ~]# cd /usr/local/src/php-7.0.33/
[root@wencheng php-7.0.33]# yum install -y libxml2-devel libcurl-devel libjpeg-turbo-devel libpng-devel
[root@wencheng php-7.0.33]# ./configure --prefix=/usr/local/app/php --enable-ftp --enable-zip --enable-fpm \
--with-pdo-mysql --with-jpeg-dir --with-png-dir --with-gd --with-curl --enable-mbstring --enable-bcmath --enable-sockets
参数说明：
--prefix=/usr/local/app/php　　php安装的根目录
--enable-ftp 　　开启ftp
--enable-zip 　　打开对zip的支持
--enable-fpm　　开启fpm
--with-pdo-mysql 　　php依赖mysql库
--with-jpeg-dir 　　指定jpeg安装目录yum安装过后不用再次指定会自动找到
--with-png-dir 　　指定png安装目录yum安装过后不用再次指定会自动找到
--with-gd 　　　　gd库
--with-curl 　　允许curl扩展
--enable-mbstring 　　开启多字节字符串函数
--enable-bcmath 　　打开图片大小调整,用到zabbix监控的时候用到了这个模块
--enable-sockets　　开启套节字

[root@wencheng ~]# cp /usr/local/src/php-7.0.33/php.ini-production /etc/php7/php.ini
[root@wencheng ~]# vim /etc/php7/php.ini 　　//修改时区
date.timezone = PRC　　　

# 添加 php-fpm 管理相关的配置文件到系统配置目录 /etc/init.d
[root@wencheng php-7.0.33]# pwd
/usr/local/src/php-7.0.33
[root@wencheng php-7.0.33]# cp sapi/fpm/init.d.php-fpm /etc/init.d/php7.0-fpm

# 添加 php-fpm 配置文件
[root@wencheng etc]# pwd
/usr/local/app/php/etc
[root@wencheng etc]# cp php-fpm.conf.default php-fpm.conf

# 添加 www.conf 配置文件
[root@wencheng php-fpm.d]# pwd
/usr/local/app/php/etc/php-fpm.d
[root@wencheng php-fpm.d]# cp www.conf.default www.conf

# 创建软连接
[root@wencheng ~]# ln -s /usr/local/app/php/bin/php /usr/local/bin/php
[root@wencheng ~]# ln -s /usr/local/app/php/sbin/php-fpm /usr/local/bin/php-fpm
[root@wencheng ~]# ls -l /usr/local/bin/
total 0
lrwxrwxrwx 1 root root 26 May  8 11:41 php -> /usr/local/app/php/bin/php
lrwxrwxrwx 1 root root 31 May  8 11:41 php-fpm -> /usr/local/app/php/sbin/php-fpm

# 测试PHP的配置文件是否无误
[root@wencheng ~]# php-fpm -t
[08-May-2021 11:56:55] NOTICE: configuration file /usr/local/app/php/etc/php-fpm.conf test is successful

# 查看php版本
[root@wencheng ~]# php -v
PHP 7.0.33 (cli) (built: May  8 2021 11:10:06) ( NTS )
Copyright (c) 1997-2017 The PHP Group
Zend Engine v3.0.0, Copyright (c) 1998-2017 Zend Technologies

# 设置php开机启动
[root@wencheng ~]# chmod +x /etc/init.d//php7.0-fpm
[root@wencheng ~]# chkconfig --add php7.0-fpm
[root@wencheng ~]# chkconfig php7.0-fpm on

[root@wencheng ~]# systemctl start php-fpm
[root@wencheng ~]# ps -ef | grep php
root      49126      1  0 12:02 ?        00:00:00 php-fpm: master process (/usr/local/app/php/etc/php-fpm.conf)
nobody    49127  49126  0 12:02 ?        00:00:00 php-fpm: pool www
nobody    49128  49126  0 12:02 ?        00:00:00 php-fpm: pool www
root      49155  76797  0 12:02 pts/1    00:00:00 grep --color=auto php
[root@wencheng ~]# ss -ntl | grep 9000
LISTEN     0      128    127.0.0.1:9000                     *:*

[root@wencheng ~]# mkdir -p /var/www/html/phpmyadmin　　　　//创建数据存放目录

[root@wencheng ~]# yum install -y wget unzip

[root@wencheng ~]# wget https://files.phpmyadmin.net/phpMyAdmin/4.0.10.20/phpMyAdmin-4.0.10.20-all-languages.zip
[root@wencheng ~]# ls -l phpMyAdmin-4.0.10.20-all-languages.zip
-rw-r--r--. 1 root root 7457007 Mar 29  2017 phpMyAdmin-4.0.10.20-all-languages.zip

[root@wencheng ~]# unzip phpMyAdmin-4.0.10.20-all-languages.zip　　　　//解压
[root@wencheng ~]# mv phpMyAdmin-4.0.10.20-all-languages/* /var/www/html/phpmyadmin　　　　//移动至phpMyAdmin数据存放目录