上一篇文章中，介绍了Spring中动态代理的使用方式，通过ProxyFactory来创建代理对象，ProxyFactory可以通过addAdvisor()来添加匹配逻辑和代理逻辑，这篇文章重点介绍ProxyFactory是如何产生代理对象以及代理对象是如何执行代理逻辑的
一、ProxyFactory生成代理对象
使用ProxyFactory添加advisor，并创建代理对象，调用代理对象的test()方法，代码如下：
BeforeAdvisor:
public class LizhiBeforeAdvisor implements PointcutAdvisor {
@Override
public Advice getAdvice() {
return new LizhiBeforeAdvice();
}
@Override
public boolean isPerInstance() {
return false;
}
@Override
public Pointcut getPointcut() {
return Pointcut.TRUE;
}
}
public class LizhiBeforeAdvice implements MethodBeforeAdvice {
@Override
public void before(Method method, Object[] args, Object target) throws Throwable {
System.out.println("before");
}
}
LizhiAroundAdvisor和LizhiAfterReturningAdvisor与上面BeforeAdvisor逻辑基本类似
重点介绍getProxy()方法
UserService target = new UserService();
ProxyFactory proxyFactory = new ProxyFactory();
proxyFactory.setTarget(target);
proxyFactory.addAdvisor(new LizhiBeforeAdvisor());
proxyFactory.addAdvisor(new LizhiAroundAdvisor());
proxyFactory.addAdvisor(new LizhiAfterReturningAdvisor());
UserService userService = (UserService) proxyFactory.getProxy();
userService.test();
1.1 生成AopProxy
在生成代理对象之前，需要判断使用哪种代理方式来生成代理对象，JDK或CGLIB
public Object getProxy() {
return createAopProxy().getProxy();
}
protected final synchronized AopProxy createAopProxy() {
if (!this.active) {
activate();
}
// 默认为DefaultAopProxyFactory
return getAopProxyFactory().createAopProxy(this);
}
NativeDetector.inNativeImage()用于判断当前程序是否运行在GraalVM上(类似JVM)，如果是着这种情况，就只能只用JDK动态代理
config对象就是ProxyFactory对象，isOptimize()判断是否需要进行优化，较早的版本，CGLIB的效率比JDK要好，可以通过设置ProxyFactory的optimize等于true来使用CGLIB
isProxyTargetClass()判断是否为类进行代理，如果为true，即使被代理类实现了接口，也会使用CGLIB进行代理
hasNoUserSuppliedProxyInterfaces()用于判断是否添加了接口，如果没有添加接口，则使用CGLIB
只满足上面这些条件，还不能直接使用CGLIB，还需要判断被代理的类是否为接口，如果是接口，则使用JDK动态代理；或者被代理类本身就是一个JDK代理类，也将使用JDK动态代理；
只有不满足上前上个条件时，才会使用CGLIB进行代理；其他情况都使用JDK进行动态代理
public AopProxy createAopProxy(AdvisedSupport config) throws AopConfigException {
if (!NativeDetector.inNativeImage() &&
(config.isOptimize() || config.isProxyTargetClass() || hasNoUserSuppliedProxyInterfaces(config))) {
Class<?> targetClass = config.getTargetClass();
if (targetClass == null) {
throw new AopConfigException("TargetSource cannot determine target class: " +
"Either an interface or a target is required for proxy creation.");
}
if (targetClass.isInterface() || Proxy.isProxyClass(targetClass)) {
return new JdkDynamicAopProxy(config);
}
return new ObjenesisCglibAopProxy(config);
}
else {
return new JdkDynamicAopProxy(config);
}
}
1.2 生成代理对象
生成AopProxy后就可以去生成代理对象了
JDK生成代理对象：
public Object getProxy(@Nullable ClassLoader classLoader) {
if (logger.isTraceEnabled()) {
logger.trace("Creating JDK dynamic proxy: " + this.advised.getTargetSource());
}
// this实现了InvocationHandler
return Proxy.newProxyInstance(classLoader, this.proxiedInterfaces, this);
}
CGLIB生成代理对象：
主要通过Enhancer来生成被代理类的代理类和代理对象，与JDK不同的点就在于不仅会生成一个代理对象，还会生成一个代理类
// 被代理的类
Class<?> rootClass = this.advised.getTargetClass();
Assert.state(rootClass != null, "Target class must be available for creating a CGLIB proxy");
Class<?> proxySuperClass = rootClass;
// 如果被代理类本身就已经是Cglib所生成的代理类了
if (rootClass.getName().contains(ClassUtils.CGLIB_CLASS_SEPARATOR)) {
// 获取真正的被代理类
proxySuperClass = rootClass.getSuperclass();
// 获取被代理类所实现的接口
Class<?>[] additionalInterfaces = rootClass.getInterfaces();
for (Class<?> additionalInterface : additionalInterfaces) {
this.advised.addInterface(additionalInterface);
}
}
// Validate the class, writing log messages as necessary.
validateClassIfNecessary(proxySuperClass, classLoader);
// Configure CGLIB Enhancer...
Enhancer enhancer = createEnhancer();
if (classLoader != null) {
enhancer.setClassLoader(classLoader);
if (classLoader instanceof SmartClassLoader &&
((SmartClassLoader) classLoader).isClassReloadable(proxySuperClass)) {
enhancer.setUseCache(false);
}
}
// 被代理类，代理类的父类
enhancer.setSuperclass(proxySuperClass);
// 代理类额外要实现的接口
enhancer.setInterfaces(AopProxyUtils.completeProxiedInterfaces(this.advised));
enhancer.setNamingPolicy(SpringNamingPolicy.INSTANCE);
enhancer.setStrategy(new ClassLoaderAwareGeneratorStrategy(classLoader));
// 获取和被代理类所匹配的Advisor
Callback[] callbacks = getCallbacks(rootClass);
Class<?>[] types = new Class<?>[callbacks.length];
for (int x = 0; x < types.length; x++) {
types[x] = callbacks[x].getClass();
}
// fixedInterceptorMap only populated at this point, after getCallbacks call above
enhancer.setCallbackFilter(new ProxyCallbackFilter(
this.advised.getConfigurationOnlyCopy(), this.fixedInterceptorMap, this.fixedInterceptorOffset));
enhancer.setCallbackTypes(types);
// Generate the proxy class and create a proxy instance.
return createProxyClassAndInstance(enhancer, callbacks);
二、执行代理逻辑
以JDK动态代理为例：
在调用代理对象的方法时，会进入到InvocationHandler的invoke()方法，而JdkDynamicAopProxy本身实现了InvocationHandler接口
2.1 不执行代理逻辑
如果接口中没有定义equals()和hashCode()，但代理对象调用了这两个方法，就直接执行这个方法，不执行代理逻辑
public Object invoke(Object proxy, Method method, Object[] args) throws Throwable {
Object oldProxy = null;
boolean setProxyContext = false;
// 拿到备代理对象
TargetSource targetSource = this.advised.targetSource;
Object target = null;
// 如果接口中没有定义equals()方法，那么则直接调用，不走代理
if (!this.equalsDefined && AopUtils.isEqualsMethod(method)) {
// The target does not implement the equals(Object) method itself.
return equals(args[0]);
}
else if (!this.hashCodeDefined && AopUtils.isHashCodeMethod(method)) {
// The target does not implement the hashCode() method itself.
return hashCode();
}
……
}
2.2 ThreadLocal设置代理对象
如果ProxyFactory的exposeProxy为true，则把当前的代理对象设置到当前线程的ThreadLocal中，业务代码中可以通过AopContext.currentProxy()获取到当前类的代理对象，可以用于解决事务方法调用时事务失效的问题
private static final ThreadLocal<Object> currentProxy = new NamedThreadLocal<>("Current AOP proxy");
if (this.advised.exposeProxy) {
// Make invocation available if necessary.
oldProxy = AopContext.setCurrentProxy(proxy);
setProxyContext = true;
}
static Object setCurrentProxy(@Nullable Object proxy) {
Object old = currentProxy.get();
if (proxy != null) {
currentProxy.set(proxy);
}
else {
currentProxy.remove();
}
return old;
}
2.3 获取所有匹配的Advice
通过getInterceptorsAndDynamicInterceptionAdvice()获取所有与当前类的当前方法匹配的Advice
// 被代理对象和代理类
target = targetSource.getTarget();
Class<?> targetClass = (target != null ? target.getClass() : null);
// Get the interception chain for this method.
List<Object> chain = this.advised.getInterceptorsAndDynamicInterceptionAdvice(method, targetClass);
先从缓存methodCache中去取，把method封装成MethodCacheKey，作为缓存的Key，如果缓存中没有，则通过getInterceptorsAndDynamicInterceptionAdvice()去获取
public List<Object> getInterceptorsAndDynamicInterceptionAdvice(Method method, @Nullable Class<?> targetClass) {
MethodCacheKey cacheKey = new MethodCacheKey(method);
// 注意这个List，表示的就是Advice链
List<Object> cached = this.methodCache.get(cacheKey);
if (cached == null) {
cached = this.advisorChainFactory.getInterceptorsAndDynamicInterceptionAdvice(
this, method, targetClass);
this.methodCache.put(cacheKey, cached);
}
return cached;
}
ProxyFactory会把添加的advice都封装成advisor，然后遍历advisor进行匹配，主要通过Pointcut的逻辑进行匹配
@Override
public List<Object> getInterceptorsAndDynamicInterceptionAdvice(
Advised config, Method method, @Nullable Class<?> targetClass) {
// This is somewhat tricky... We have to process introductions first,
// but we need to preserve order in the ultimate list.
AdvisorAdapterRegistry registry = GlobalAdvisorAdapterRegistry.getInstance();
// 从ProxyFactory中拿到所设置的Advice（添加时被封装成了DefaultPointcutAdvisor）
// 添加的时候会控制顺序
Advisor[] advisors = config.getAdvisors();
List<Object> interceptorList = new ArrayList<>(advisors.length);
Class<?> actualClass = (targetClass != null ? targetClass : method.getDeclaringClass());
Boolean hasIntroductions = null;
……
return interceptorList;
}
lizhiBeforeAdvisor:
public class LizhiBeforeAdvisor implements PointcutAdvisor {
@Override
public Advice getAdvice() {
return new LizhiBeforeAdvice();
}
@Override
public boolean isPerInstance() {
return false;
}
@Override
public Pointcut getPointcut() {
return new Pointcut() {
@Override
public ClassFilter getClassFilter() {
return new ClassFilter() {
@Override
public boolean matches(Class<?> clazz) {
return clazz.equals(UserService.class);
}
};
}
@Override
public MethodMatcher getMethodMatcher() {
return new MethodMatcher() {
@Override
public boolean matches(Method method, Class<?> targetClass) {
return false;
}
@Override
public boolean isRuntime() {
return false;
}
@Override
public boolean matches(Method method, Class<?> targetClass, Object... args) {
return false;
}
};
}
};
}
}
遍历所有advisor进行匹配
根据上面定义的advisor，结合下面的匹配逻辑，可以清楚的看到，首先判断根据ClassFilter的matches()方法判断当前Advisor与当前类是否匹配，如果为true再进行方法匹配
先判断matches(Method method, Class<?> targetClass)是否匹配，如果为true，将Advisor封装成为MethodInterceptor，在真正执行Advisor的代理逻辑时，都是执行MethodInterceptor的invoke()方法里面的逻辑
再判断isRuntime()是否为true时，说明在调用方法时，还需要进行参数匹配，所以将isRuntime()为true的advisor封装成为InterceptorAndDynamicMethodMatcher，在真正调用时，还会调用matches(Method method, Class<?> targetClass, Object… args)方法进行校验
for (Advisor advisor : advisors) {
if (advisor instanceof PointcutAdvisor) {
// Add it conditionally.
PointcutAdvisor pointcutAdvisor = (PointcutAdvisor) advisor;
// 先匹配类
if (config.isPreFiltered() || pointcutAdvisor.getPointcut().getClassFilter().matches(actualClass)) {
// 再匹配方法
MethodMatcher mm = pointcutAdvisor.getPointcut().getMethodMatcher();
boolean match;
if (mm instanceof IntroductionAwareMethodMatcher) {
if (hasIntroductions == null) {
hasIntroductions = hasMatchingIntroductions(advisors, actualClass);
}
match = ((IntroductionAwareMethodMatcher) mm).matches(method, actualClass, hasIntroductions);
}
else {
match = mm.matches(method, actualClass);
}
if (match) {
// 如果匹配则将Advisor封装成为Interceptor，当前Advisor中的Advice可能即是MethodBeforeAdvice，也是ThrowsAdvice
MethodInterceptor[] interceptors = registry.getInterceptors(advisor);
if (mm.isRuntime()) {
// Creating a new object instance in the getInterceptors() method
// isn't a problem as we normally cache created chains.
for (MethodInterceptor interceptor : interceptors) {
interceptorList.add(new InterceptorAndDynamicMethodMatcher(interceptor, mm));
}
}
else {
interceptorList.addAll(Arrays.asList(interceptors));
}
}
}
}
……
}
2.3.1 Advisor封装成MethodInterceptor
MethodInterceptor[] interceptors = registry.getInterceptors(advisor);
如果Advice实现的是MethodInterceptor接口，则直接添加到interceptors
如果Advice是实现的Advice接口，则通过AdvisorAdapter进行适配，主要包括MethodBeforeAdviceAdapter、AfterReturningAdviceAdapter和ThrowsAdviceAdapter
public DefaultAdvisorAdapterRegistry() {
registerAdvisorAdapter(new MethodBeforeAdviceAdapter());
registerAdvisorAdapter(new AfterReturningAdviceAdapter());
registerAdvisorAdapter(new ThrowsAdviceAdapter());
}
public void registerAdvisorAdapter(AdvisorAdapter adapter) {
this.adapters.add(adapter);
}
public MethodInterceptor[] getInterceptors(Advisor advisor) throws UnknownAdviceTypeException {
List<MethodInterceptor> interceptors = new ArrayList<>(3);
Advice advice = advisor.getAdvice();
if (advice instanceof MethodInterceptor) {
interceptors.add((MethodInterceptor) advice);
}
// 将Advice适配成MethodInterceptor
for (AdvisorAdapter adapter : this.adapters) {
if (adapter.supportsAdvice(advice)) {
interceptors.add(adapter.getInterceptor(advisor));
}
}
if (interceptors.isEmpty()) {
throw new UnknownAdviceTypeException(advisor.getAdvice());
}
return interceptors.toArray(new MethodInterceptor[0]);
}
通过AdvisorAdapter的supportsAdvice()方法进行适配，以MethodBeforeAdviceAdapter为例：
如果advice实现了MethodBeforeAdvice接口，返回true，然后调用getInterceptor()方法，将MethodBeforeAdvice封装成一个MethodBeforeAdviceInterceptor
class MethodBeforeAdviceAdapter implements AdvisorAdapter, Serializable {
@Override
public boolean supportsAdvice(Advice advice) {
return (advice instanceof MethodBeforeAdvice);
}
@Override
public MethodInterceptor getInterceptor(Advisor advisor) {
MethodBeforeAdvice advice = (MethodBeforeAdvice) advisor.getAdvice();
return new MethodBeforeAdviceInterceptor(advice);
}
}
2.4 执行代理逻辑
当匹配所有的Advisor之后，没有像匹配的，则直接调用invokeJoinpointUsingReflection()方法
如果有相匹配的Advisor，则生成MethodInvocation对象，然后调用其proceed()方法
List<Object> chain = this.advised.getInterceptorsAndDynamicInterceptionAdvice(method, targetClass);
// Check whether we have any advice. If we don't, we can fallback on direct
// reflective invocation of the target, and avoid creating a MethodInvocation.
if (chain.isEmpty()) {
// We can skip creating a MethodInvocation: just invoke the target directly
// Note that the final invoker must be an InvokerInterceptor so we know it does
// nothing but a reflective operation on the target, and no hot swapping or fancy proxying.
// 如果没有Advice，则直接调用对应方法
Object[] argsToUse = AopProxyUtils.adaptArgumentsIfNecessary(method, args);
retVal = AopUtils.invokeJoinpointUsingReflection(target, method, argsToUse);
}
else {
// We need to create a method invocation...
MethodInvocation invocation =
new ReflectiveMethodInvocation(proxy, target, method, args, targetClass, chain);
// Proceed to the joinpoint through the interceptor chain.
retVal = invocation.proceed();
}
currentInterceptorIndex初始值为-1，每调用一个MethodInterceptor就会加1，按照Advisor添加的顺序，开始执行Advisor的代理逻辑
如果当前的MethodInterceptor为InterceptorAndDynamicMethodMatcher，需要调用matches(this.method, targetClass, this.arguments)进行参数匹配，匹配成功调用invoke()方法，匹配不成功，则递归调用，获取下一个MethodInterceptor，进行判断。
注意，invoke(this)的入参为当前类对象，会形成递归调用，相当于一条chain
public Object proceed() throws Throwable {
// We start with an index of -1 and increment early.
// 当调用完了最后一个interceptor后就会执行被代理方法
if (this.currentInterceptorIndex == this.interceptorsAndDynamicMethodMatchers.size() - 1) {
return invokeJoinpoint();
}
Object interceptorOrInterceptionAdvice =
this.interceptorsAndDynamicMethodMatchers.get(++this.currentInterceptorIndex);
// 当前interceptor是InterceptorAndDynamicMethodMatcher，则先进行匹配，匹配成功后再调用该interceptor
// 如果没有匹配则递归调用proceed()方法，调用下一个interceptor
if (interceptorOrInterceptionAdvice instanceof InterceptorAndDynamicMethodMatcher) {
// Evaluate dynamic method matcher here: static part will already have
// been evaluated and found to match.
InterceptorAndDynamicMethodMatcher dm =
(InterceptorAndDynamicMethodMatcher) interceptorOrInterceptionAdvice;
Class<?> targetClass = (this.targetClass != null ? this.targetClass : this.method.getDeclaringClass());
// 动态匹配，根据方法参数匹配
if (dm.methodMatcher.matches(this.method, targetClass, this.arguments)) {
return dm.interceptor.invoke(this);
}
else {
// Dynamic matching failed.
// Skip this interceptor and invoke the next in the chain.
// 不匹配则执行下一个MethodInterceptor
return proceed();
}
}
else {
// It's an interceptor, so we just invoke it: The pointcut will have
// been evaluated statically before this object was constructed.
// 直接调用MethodInterceptor，传入this，在内部会再次调用proceed()方法进行递归
// 比如MethodBeforeAdviceInterceptor
return ((MethodInterceptor) interceptorOrInterceptionAdvice).invoke(this);
}
}
以MethodBeforeAdviceInterceptor为例：
调用MethodBeforeAdviceInterceptor的invoke()方法时，会先去执行before()方法的逻辑，然后再递归调用proceed()方法
public class MethodBeforeAdviceInterceptor implements MethodInterceptor, BeforeAdvice, Serializable {
private final MethodBeforeAdvice advice;
/**
* Create a new MethodBeforeAdviceInterceptor for the given advice.
* @param advice the MethodBeforeAdvice to wrap
*/
public MethodBeforeAdviceInterceptor(MethodBeforeAdvice advice) {
Assert.notNull(advice, "Advice must not be null");
this.advice = advice;
}
@Override
@Nullable
public Object invoke(MethodInvocation mi) throws Throwable {
this.advice.before(mi.getMethod(), mi.getArguments(), mi.getThis());
return mi.proceed();
}
}
在CGLIB中，执行逻辑同JDK，CGLIB是在DynamicAdvisedInterceptor的intercept()方法中去匹配Advisor，然后封装成CglibMethodInvocation，调用proceed()方法，CglibMethodInvocation实现了ReflectiveMethodInvocation，所以proceed()与JDK的proceed()是同一个方法
版权声明：本文内容由互联网用户自发贡献，该文观点仅代表作者本人。本站仅提供信息存储空间服务，不拥有所有权，不承担相关法律责任。如发现本站有涉嫌侵权/违法违规的内容， 请发送邮件至 举报，一经查实，本站将立刻删除。
文章由极客之音整理，本文链接：https://www.bmabk.com/index.php/post/153652.html
